• Home
• Store
• Materials
• Chemistry

-0%

×

Pasco Epoxy 6 ml two-component adhesive

Price:63 uah with VATPrice in USD:1.50

Bonuses will be issued for this product upon purchase

Read more

SKU 12496

Archival goods

This item is no longer supplied

Out of stock

Notify when available

Description

PASCO H-011 6 ml adhesive based on polyepoxy resin and acid hardener.

Characteristics

• Application: rubber, metal, plastic, wood, textiles
• Volume: 6ml

Instructions

• Clean and dry the surfaces to be joined.
• Unpack the tubes, squeeze out an equal volume of liquid adhesive and hardener from tubes A and B onto a clean smooth surface, mix them in equal proportions.
• Use the prepared mixture immediately on the surface of the material or device to be joined. The curing process takes place within 5-10 minutes at room temperature. After gluing, leave for at least 3 hours. For better consolidation of the result, leave for 24 hours.

Do not change the caps of tubes A and B . During each use, mix proper amount of glue as per requirement. The glue mixture should be used for 3 to 4 minutes. Do not touch and protect the skin during use. In case of skin contact with the adhesive, wash immediately with warm water and soap. Keep out of reach of children.