• Home
• Store
• Radio equipment
• Receivers RX

-0%

×

JHEMCU ExpressLRS 2G4-P 2.4G Receiver

Price:544 uah with VATPrice in USD:13.00

Bonuses will be issued for this product upon purchase

Read more

Brand: JHEMCUSKU 16772

Out of stock

Notify when available

Description

JHEMCU 2G4-P 2.4G compact radio control receiver has 5 PWM outputs, running on ExpressLRS firmware, for FPV drone installation

Features

• ISM Type: 2.4G
• Frequency Range: 2400 to 2500MHz
• Processor: ESP8285
• RF module: SX1280/1281
• PWM Frequency: 50Hz
• Telemetry Power: 12dBm
• Receiver Protocol: PWM or CRSF
• Input voltage: 4~10V DC (each PWM pad has its own VCC)
• Power consumption: 45mA (binding mode), 85mA (Wi-Fi mode)
• PCB size: 25mm x 13mm
• Weight: 2g, with antenna

Receiver binding procedure

1. After the receiver is connected to the flight controller, connect USB to power the flight controller. After the first USB connection, disconnect the USB as soon as the LED on the receiver goes out. Repeat the operation twice. When the USB is connected a third time, the LED will flash twice and the receiver will go into bind (bind) mode.
2. Once the 2.4G ELRS module and radio hardware are properly connected, copy the ELRS.LUA file to the SD card in the radio hardware, SD Card/Scripts/tools directory, and then run ELRS.LUA for the bind operation
3. After successful binding, the LED on the receiver will be on continuously and a telemetry signal can be received at the same time.

LED indication

• Double blinking LED: binding mode.
• Slow flashing: No signal from the TX module.
• Steady on: successful reception of the transmit signal
• Fast flashing: WiFi update mode

Accessories

• 1 ELRS-2G4-P
• 1 IPEX MHF1 antenna
• 1 X5P 2.54 connector

Photos