Toolkit RC M6 V2 is a compact multifunctional charger with a color LCD screen and 150W charging power. The charger boasts a wide range of functions such as servo tester, battery cell check, wattmeter (power meter), PWM, PPM, S.BUS (for testing receiver without flight controller) input/output signal, automatic cell detection, can be used as a PowerBank or as a power supply.
Note: there are 2 folding feet on the unit, which need to be extended for effective cooling and to prevent overheating. Carefully make sure nothing interferes with the rotation of the cooler.
Features
Charge, discharge, storage mode for popular battery types LiPo, LiHV, LiFe, Li-ion, NiMh, Pb
Fast balancing mode - battery cell voltage equalization through balancing connector by the lowest voltage cell
Automatic detection of the number of battery cells (Cells:Auto)
Saves up to three charge profiles for quick access
Battery cell testing: voltage, resistance
Servo tester for testing servo machines or motorized motors with speed controller (automatic or manual mode)
Receiver tester. Reads or simulates PWM, PPM, S.BUS signal transmission, measurement at 1ms accuracy
AMP / Volt DC power supply (external DC input required)
Lithium battery cutoff voltage can be set (TVC function)
Laboratory power supply mode where you can set the desired voltage and limit the current (e.g. for charging non-standard batteries). Adjustable constant output voltage 1-28V, constant output current limit 1-10A
USB 2.1A/5.0V output (mobile device charging or firmware update)
Color LCD display and touch buttons
Large cooler for efficient cooling
Very compact size, with an impressive power of 150W
USB: 2.1A / 5.0V (mobile device charging or firmware update via USB)
LCD display: 1.8-inch TFT RGB, 160x128 pixels
Dimensions: 68 x 49 x 26mm
Weight: 80g
Measurement
PWM: 880-2200us at 20-400Hz
PPM: 880-2200us x 8CH at 20-50Hz
SBUS: 880-2200us x 16CH at 20-100Hz
Voltage: 1.0-5.0V at 1-6S
IR: 10-99mR at 1-6S
Output
PWM: 500-2500us at 20-1000Hz
PPM: 880-2200us x 8CH at 50Hz
SBUS: 880-2200us x 16CH at 74Hz
Power supply mode: 1-10A at 1-28V / Mode: CC + CV
Accessories
1 x Toolkit RC M6 charger
1 x USB to USB cable 30cm
1 x screen protector
Calibration
To enter the calibration mode, press the EXIT button once when the charger is powered up and the logo appears. The charger will enter the calibration mode. In this menu item, it is necessary to correct the voltage value on the cells in accordance with the real values when measuring the voltage on the multitester. After the calibration is done, select the SAVE menu item to fix the changes.
Прошивка сразу 2.1, обновлять не пришлось, хотя и не получилось бы потому что сайт производителя не работает. На просторах удалось найти только 1.1. Меню шустрое, пока не тормозила. Парням отдельно спасибо за оперативность и доверие.
Brand: ToolkitRCSKU 14508
Reviews and discussions
Registration