TheHappymodel HC700R Zoom features a 16x autofocus zoom for shooting at different distances. It supports 1080p video recording at 25 frames per second. Remote control allows you to zoom in and out and start or stop recording. The AV output provides analog signals to external devices. The built-in SD card slot supports cards up to 64GB. Power is provided by a 12V source and the dimensions are 51x62x100mm.
Features
Digital interchangeable camera with 16x autofocus
High-definition recording - 1080p25fps
Remote zoom control and start/stop recording
With AV signal output, you can send signals through analog images
Built-in SD card slot, supports SD card up to 64G
Specifications.
Video recording: 1080p25fps
Zooming: 16х
Supports SD card: up to 64G
Power supply: 12V
Dimensions: 51x62x100
Weight: 197g
Package contents
1 x Happymodel HC700R Zoom 16x camera
1 x JST 6Pin cable
1 x bolt
Pinout definition:
Blue: PWM zoom, for zoom control signal
Green: PWM recording input, for switching the video function
Yellow: AV output, for video signal output
Black: GND, for video grounding
Red: vcc12v in, for 12 V input power, positive wire
Black: GND, for negative input power supply wire
Wiring method:
The blue wire is connected to the pmw port of the receiver, which requires an external 5V power supply. The power wire must be connected to the negative port of the camera's power input wire, otherwise it will not be controlled unless they share a common ground
The yellow-black wire of the camera should be on a common ground with the FPV transmitter to prevent the no signal situation
12V power input for the camera, you can use 12V bec module
Instruction:
It takes about 20 seconds for the camera to start up. When the image appears, DO NOT press the record button for a few seconds until the camera's internal background work completes preparation
After recording is complete, wait 5 seconds to start a new recording or turn it off. It takes time to save the previous video, turning off too quickly or starting a new recording quickly may cause the previous video to fail to save
To eject videos from an SD card, you should use the "Diskplayer" software released by the manufacturer. When inserting the SD card, you may be prompted to format it, please do not format it. Simply open the software and find the video document in "idea 1", copy the video, change the file format to "AVI" and save it. Then you can watch the video in any player
Example of setting up the Happymodel HC700R Zoom 16x camera
Brand: HappymodelSKU 17767
Reviews and discussions
There are no messages yet. Leave your message first.
Registration