Step-down mini DC-DC switching voltage regulator from FlyMod with an input voltage of up to 36V, and the ability to select an output voltage from 3.3V to 12V, maximum current of 3 Amps.
Features.
Choice of output voltage 3.3V (default, jumpers are not soldered), 5V, 7.5V, 9V, 12V (only 1 corresponding jumper is soldered)
High conversion efficiency, more than 95%
Up to 3A DC output current
Possibility to turn off the voltage output via the EN pin on the board. When a low level (GND) is applied to the EN pin, the module will switch to the off state
Ukrainian development
Characteristics
Rectification: synchronous
Input voltage(V_IN): DC 5.5 - 36V (input voltage must be greater than the output voltage)
Solomon Anarchcore, через ПВМ не вийде, але якщо с польотника вивести логічну 0 чи 1 (GND чи високий сигнал), то можно керувати підключивши на контакт EN.
Reviews and discussions
Референси:
https://betaflight.com/docs/wiki/guides/current/Pinio-and-PinioBox
https://github.com/iNavFlight/inav/discussions/6491
Registration