• Home
• Store
• Electronic FPV components
• Flight controllers

-0%

×

SpeedyBee F7 V3 WiFi/Bluetooth flight controller

Price:2 794 uah with VATPrice in USD:67.00

Bonuses will be issued for this product upon purchase

Read more

Brand: SpeedyBeeSKU 16832

Out of stock

Notify when available

Description

The SpeedyBee F7 V3 flight controller is an F722 FC with a BMP280 barometer, on-screen menus, built-in 500MB BlackBox flash memory, built-in FC LiPo monitoring and many other features.

The SpeedyBee F7 V3 version features solderless connection options, this flight controller is the perfect addition to your FPV build.

Features

• Supports BetaFlight (default), EMUFlight flight controller firmware
• SmartPort - utilizes any UART transmit pad for SmartPort function.
• Supports BLE, used to customize the flight controller.
• Full slot DJI Air Unit JST on board
• WiFi support - used for transferring data such as firmware
• Download button - used to quickly enter DFU mode
• RSSI input
• WS2812 LEDs
• WiFi/Bluetooth capabilities

Features

• Processor: STM32F722
• Gyroscope: MPU6000
• Barometer: BMP280 (I2C)
• OSD: BetaFlight OSD with AT7456E chip
• Built-in BlackBox flash memory: 500Mb
• BetaFlight camera control panel: Yes
• Power Consumption: 3S - 6S LiPo
• UART port: full UART x 5 (UART1, UART2, UART3, UART5, UART6)
• ESC telemetry: UART UART4 RX
• ESC signal pads: M1-M4 on the back side and M5-M8 on the front side
• I2C bus: is there, SDA and SCL pads on the front side, used for external magnetometer, sonar, etc.
• Support WS2812 LED modules: yes
• Support beeper: yes, 5V (BZ+ and BZ- pads)
• RSSI input: Yes
• Interface: USB-C
• DJI Air Unit slot: yes
• Firmware: BetaFlight
• Firmware Target: SPEEDYBEEF7V3
• IMU: BMI270
• USB: Type-C
• Mounting Diagram: 30.5 x 30.5mm, hole size M4
• Dimensions: 41 x 38 x 8.1mm
• Weight: 10.7g

Recommendations

Warning: Do not apply a protective coating (varnish) to the barometer as this may clog the ventilation hole.

Accessories

• 1 x SpeedyRee F7 V3 Flight Controller
• 1 x DJI 6pin Cable(80mm)
• 1 x SH 1.0mm 30mm-length 8pin Cable(for FC-ESC connection)
• 5 x M3*8mm Silicone Grommets(for FC)
• 1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(30mm) (A)
• 1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(60mm) (B)
• 1 x 4pin SH1.0 to 4pin JST1.25 FPV Cam Cable(60mm) (C)
• 1 x 4pin SH1.0 Radio Receiver Cable(100mm) (D)
• 1 x 4pin SH1.0 to 4pin SH1.0 Analog VTX Cable (E)
• 1 x 6pin SH1.0 GPS Module Cable without Connector on other end(100mm) (F)
• 1 x 6pin SH1.0 GPS Module Cable Connector on another end (G)

Photos