The RunCam Racer series has long established itself in world FPV competitions as one of the best analog cameras for FPV racing. But with version 5, Runcam takes it to new heights and the Racer 5 becomes the first FPV camera with abuilt-in gyroscope.
The gyroscope allows the pilot to pinpoint the most comfortable camera angle. The tilt angle is displayed in real time on the camera's flight OSD or on the BetaFlight OSD.
Another new feature is the ability to update the camera firmware via the Speedybee app for Android and iOS. With the Android app, you can use a USB cable to connect your phone to the flight controller. But with iOS you will need a Wi-Fi adapter as iOS does not support OTG connection.
Note: For BetaFlight before version 4.3, first enable the MSP serial port switch. In Betaflight 4.3, select Runcam device, remote control camera + gyro directly. https://github.com/betaflight/betaflight/pull/10214
Features
Built-in gyroscope to detect the camera angle
Supports firmware update via SpeedyBee app
Ultra low latency, up to 6ms
Customizable NTSC / PAL TV format and 4:3 / 16:9 resolution (Racing View)
Perfect factory settings
Automatic shutter speed
Built-in flight OSD: voltage, timer, name
Camera setup: joystick / via UART
Super WDR is an advanced digital dynamic range correction mode. The whole picture will be visible without black blockages in the shadows and white overshadows in the lights.
Video Modes: Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight
Day / Night modes: Auto / Color / B&W
Image mirroring capability
One-touch scene setting: Personal / Lightrax
The camera comes with a frame bracket designed for large FPV cameras
The weight of the camera is only 5.5g
Feature
Matrix: Super WDR CMOS
Horizontal resolution: 1000TVL
Built-in gyroscope: Yes
Lens:
1.8mm (M8) FOV 160°
2.1mm (M8) FOV 145°
Image Format: 4:3 / switchable widescreen
TV system: NTSC / PAL
S/N ratio: > 50dB
Min. illumination: 0.01Lux@1.2F
WDR: Super WDR
Electronic shutter speed: auto
Image Reversal: Yes
Flight OSD: Yes
OSD menu control: cable / remote control
Power supply: DC 5-36V
Current Consumption: 110mA at 5V / 40mA at 12V
Case material: ABS
Dimensions: 19 x 19 x 21mm
Weight: 6.1g
Accessories
1 x FPV camera RunCam Racer 5
1 x 6-pin cable
1 x screw kit
1 x user manual
Photos
Reviews and discussions
There are no messages yet. Leave your message first.
You need to be registered or authorized users to leave messages. Registration
Brand: RunCamSKU 15963
Reviews and discussions
There are no messages yet. Leave your message first.
Registration