Matek F722-WING flight controller for flying wing

Name: Matek F722-WING flight controller for flying wing
Brand: Matek
SKU: 13593
Price: 2373 UAH
Availability: OutOfStock
Rating: 4.9 (6 reviews)

Price:2 373 uahPrice in USD:56.90

Brand: MatekSKU 13593

Out of stock

Notify when available

Description

A version of Matek's WING flight controller for flying wings, made with the 216 performance STM32F722 processor. In addition to the new chip, Matek F722-WING has a number of small changes such as support for dual camera switching, built-in BEC with 5V/9V voltage selection to power the camera or VTX, high accuracy current sensing up to 132A, and now all UART ports with built-in inverter.

The Matek F722-WING has a dedicated MATEKF722SE target in the iNAV firmware, making it easy to upgrade directly from the iNAV GUI.

Features

MCU: STM32F722RET6 216 MHz
Accelerometer / Gyroscope: MPU6000 (SPI)
Barometer: BMP280 (I2C)
OSD: INAV OSD with AT7456E chip
Blackbox: MicroSD card slot (SPI)
UART ports: 5 (1,2,3,4,6) with built-in inversion
Motor outputs: 2
Servo outputs: 6
I2C ports: 1
3 x LEDs for FC STATUS (blue, red) and 3.3V BEC indicator (red)
ADC (ADC): VBAT, Current, RSSI, AirSpeed
SoftSerial on TX2 board
Switchable inputs for dual camera use
Switchable BEC: 5V / 9V
Battery Voltage Sensor: 1:10 (scale 1100)
WS2812 Led Strip: Check
TR / SA VTX control: Check
Buzzer: Check
RSSI: Check
Analog Speed Sensor Connection: Check
Digital speed sensor connection: Yes
Firmware: iNAV Flight / BetaFlight (Target: MATEKF722SE)
Mounting: 30.5 x 30.5mm, hole diameter 4mm, with 3mm spacers
Dimensions: 54 x 36 x 13mm
Weight: 25g

PDB

Input Voltage Range: 9 ~ 36V (3 ~ 6S LiPo) with TVS protection
Outputs for ESC: 2
Current Sensor: 132A, 3.3V ADC, Scale 250
BEC 5V output
- Designed for flight controller, receiver, OSD, FPV camera, buzzer, LED module, GPS module, AirSpeed
- Continuous current: 2A (max. 3A)
BEC output 9V / 12V
- Designed for video transmitter, FPV camera, LED module
- Continuous current: 2A (max. 3A)
- 12V option with jumper
BEC Vx output
- Designed for servos
- Adjustable voltage: 5V default, 6V or 7.2V with jumper.
- Continuous current: 5A, (max. 6A)
- Output ripple: 50mV (VIn = 24V, VOut = 5V at 5A load)
BEC output 3.3V
- Designed for Baro / Compass and Spektrum RX module
- Linear regulator
- Continuous current: 500 mA