TheDiatone Mamba Basic F405 Mini MK3.5 is the latest version of the flight stack for quadcopters with a 20mm x 20mm mounting pattern, released in January 2021. It consists of the Mamba Basic F405 Mini MK3.5 flight controller and the Mamba F40_BLS Mini 40A 6S LiPo 4-in-1 speed controller.
Improvements over the Diatone Mamba F405 Mini MK3 stack
I2C support
Receiver settings and OSD can be saved with USB connection
The area of contact pads increased by 140%
It is now possible to select the signal of LEDs (what will mean one or another color)
BEC short circuit protection
TVS instant 30V high voltage protection
Upgraded cable with interference protection
USB Type-C interface
Backup self-healing 5V receiver power supply
Increased VCC contact patch on camera power supply
Gyroscope uses independent Low Dropout Regulator and reduces interference from ripples
Features
General
Input Voltage: 2~6S Lipo (8.4 ~ 25.2V)
Mounting Diagram: 20 x 20mm, M2
Mamba Basic F405 Mini MK3.5 flight controller
Processor: 168MHz STM32F405RGT6
Gyroscope: MPU6000
Barometer: Yes
OSD: AT7456E
Blackbox: 16Mb flash memory
UARTs: 5
I2C: yes
LED power supply: yes
LED controller: BF LED
RSSI: supported
Buzzer: supported
TVS protection: Yes
Firmware: BetaFlight
Target: MAMBAF405US_I2C
BEC:
3.3V 0.5A
5V 2.5A
Size: 30 x 29.5 x 5.5mm
Weight: 5g
ESC 4 in 1 Mamba F40_BLS Mini
Constant current: 40A
Peak current: 45A (10sec)
Current sensor: Yes
BEC: No
Firmware: BLHeli_S
Target： CH40
Protocol： Dshot 300/600
TVS protection: Yes
Size： 29 x 29 x 5.5mm
Weight: 6.5g
Accessories
1 x Mamba Basic F405 Mini MK3.5 flight controller
1 x ESC 4 in 1 Mamba F40_BLS Mini
1 x high frequency capacitor 470uF / 35V
2 x 8-pin cable JST-SH1.0
2 x 16AWG 60mm power cable
1 x AMASS XT60H Male connector
1 x set of damping spacers
1 x insulating shield 20 x 20
1 x plastic pad 20 x 20
1 x manual
Photos
Reviews and discussions
There are no messages yet. Leave your message first.
You need to be registered or authorized users to leave messages. Registration
Brand: DiatoneSKU 15535
Reviews and discussions
There are no messages yet. Leave your message first.
Registration