• Home
• Store
• Radio equipment
• Remote control

-0%

×

Jumper T16 HALL multi-protocol JumperTX radio control equipment

Price:6 339 uah with VATPrice in USD:152.00

Bonuses will be issued for this product upon purchase

Read more

Brand: JumperSKU 13701

• Jumper T16
• Jumper T16 Hall

Select the option!Archival goods

This item is no longer supplied

Description

Jumper T16 is a multi-protocol 16-channel radio transmitter with OpenSource JumperTX software based on OpenTX.

The JumperT16 Hall is an upgraded version that features Hall sensor sticks.

One of the main features of the Jumper T16 is the large 4.3-inch color LCD screen with a resolution of 480 x 272 pixels. The LCD screen is not touch sensitive, so there are three buttons and a scroll wheel for menu navigation. Also on the case there are 6pcs. 3-pin switches, two side and two front sliders, and one 6-button flight mode switch, which is very convenient for controlling APM, Pixhawk and iNav modes.

Included with the radio hardware immediately comes the Jumper JP4IN1 2.4G multi-protocol module, which supports Walkera DEVO, Spektrum DSM2 / DSMX, Flysky, Esky, Frsky, WLtoys, Hubsan, Hisky, Futaba SFHSS Assan protocols, etc. (see table). Now you can have one hardware to control all your RC models!

The T16 is equipped with prezi-angle adjustable sticks, has voice support, haptic feedback, SD card slot and much more.

Previously, you could get this many features and benefits by purchasing radio gear in the over $200 price range, but Jumper has created their T16 radio gear with the maximum number of features at the lowest price on the RC market.

Features

• STM32F429BIT6 MCU processor
• Large 4.3-inch color LCD display with 480 x 272 pixel resolution
• Compatible with JumperTX and OpenTX firmware (firmware is the same)
• Roller button for menu navigation
• Adjustable ultra-smooth sticks with two bearings
• Included Jumper JP4IN1 2.4G multiprotocol transmitter module with support for FrSky, FlySky protocols
• Removable battery - requires two 18650 Li-Ion or 2S LiPo/LiFe cells
• Telemetry support
• Memory 16mb (can be expanded with a memory card)
• Voice notifications
• Haptic vibration feedback system
• Standard slot for JR module, support for external modules such as TBS Crossfire and Frsky R9M.
• 6-Flight Mode button (for APM and Pixhawk flight controllers)
• Two-color LED status indicator
• Hall sensor sticks (PLUS version only)

Features

• Number of channels: 16
• Voltage: DC 7-8.4V
• Current Consumption: 350mA (without external module)
• Size: 180 x 190 x 58mm
• Weight: 880g

Accessories

• 1 x Jumper T16 radio equipment
• 1 x mini USB cable
• 1 x neck strap
• 1 x spare parts for stick (return springs and throttle parts)
• 1 x screen protector
• 1 x SD card (512 MB)
• 1 x compartment for two 18650 cells
• 1 x Jumper JP4IN1 2.4G Multiprotocol Module

Photos