Diatone Mamba F722 Mini MK2 flight stack for quadcopters with a 20 x 20mm mounting pattern. Consists of the Mamba F722 Mini MK2 flight controller and the Mamba 306 4-in-1 speed controller. The stack includes everything you would expect from a modern flight controller and ESC including OSD, telemetry, Dshot1200.
Features
Mounting holes: 20×20mm, M2
Dimensions: 30 x 36.5 x 13.5mm
Total weight: 12.5g (with cable and dampers)
F405 Mini MK2 Specifications
Processor: 216MHz STM32F722RET6 32Bit
Gyroscope: MPU6000
BEC: 5V 3A
Blackbox: 16mb
OSD: AT7456
UART outputs: 6
RSSI output: yes
Buzzer output: Yes
ESC telemetry: RX2
LED indication:
Blue/orange: FC status
White: 5V BEC
Red: 3.3V BEC
Firmware: BetaFlight
Target: MAMBA F722
Dimensions: 30.5 x 29.5 x 7mm
Weight: 5g
Note:
STM32F722 generates a lot of heat, leave at least 5mm on both sides of the FC to ensure good air circulation.
Attention, please check the pinout of the LED modules to be connected, it may be different from the one used on this controller.
ESC Mamba 306 Specifications
Input voltage: 3-6S LiPo (12.6-25V)
Rated current: 30A
Peak current: 40A (5 sec)
Current sensor: yes
Telemetry: yes
BEC: no
Firmware: BLHeli_32
Protocol: Dshot 300/600/1200
Target: MAMBA 306
Size: 27 x 36 x 6mm
Weight: 5.5g
Accessories
1 x Mamba F722 Mini MK2 flight controller
1 x Mamba 306 4 in 1 speed controller
1 x 470uF 35V capacitor
1 x set of silicone rings
2 x sets of damper spacers
1 x XT60 connector
1 x set of bolts for mounting the stack to the frame
1 x spare 8pin cable
Photos
Reviews and discussions
There are no messages yet. Leave your message first.
You need to be registered or authorized users to leave messages. Registration
Brand: DiatoneSKU 14914
Reviews and discussions
There are no messages yet. Leave your message first.
Registration