TheDiatone Mamba Mamba Basic F405 MK3 is the latest version of the flight stack for quadcopters with a 30.5mm x 30.5mm mounting pattern, released in January 2021. It consists of the Mamba Basic F405 MK3 flight controller and the 4 in 1 Mamba F50 50A 6S LiPo speed controller (please note, the kit comes with the regular, non Pro version of the ESC).
Improvements over Diatone Mamba F405 MK2 V2 stack
More powerful ESC with rated current 50A
Presence of barometer on the flight controller
I2C support
It is now possible to select the signal of LEDs (what will mean this or that color)
With USB connection, you can save receiver and OSD settings
BEC short circuit protection
TVS instant 30V high voltage protection
F.port support
Upgraded cable with interference protection
USB Type-C interface
Redundant self-replenishing 5V receiver power supply
Increased VCC pin pad of camera power supply
Gyroscope uses independent Low Dropout Regulator to reduce ripple interference
Features
General
Input Voltage: 2~6S Lipo (8.4 ~ 25.2V)
Mounting Diagram: 30.5 x 30.5mm, M3
Diatone Mamba Basic F405 MK3 flight controller
Processor: 168MHz STM32F405RGT6
Gyroscope: MPU6000
Barometer: Yes
OSD: AT7456E
Blackbox: 16Mb flash memory
UARTs: 6
I2C: yes
ESC Telemetry: Yes
LED power supply: yes
LED controller: BF LED / MB LED
S/F port: yes
RSSI: supported
Buzzer: supported
TVS protection: Yes
Firmware: BetaFlight
Target: MAMBAF405US_I2C
BEC:
3.3V 0.5A
5V 3A (for LED)
5V 3A
9V 3A (for DJI)
Size: 38 x 39 x 7.5
Weight: 9g
Diatone Mamba F50 4-in-1 ESC
Constant current: 50A
Peak current: 55A (10sec)
Current Sensor: Yes
BEC: No
Firmware: BLHeli_S
Target： CH40
Protocol： Dshot 300/600
TVS protection: Yes
Size： 45 x 41 x 6.5mm
Weight： 15g
Accessories
1 x Diatone Mamba Basic F405 MK3 flight controller
Brand: DiatoneSKU 15536
Reviews and discussions
Registration