Flight Stack BetaFPV F405 4S ESC 16A V2.0 BLHeli_32

Name: Flight Stack BetaFPV F405 4S ESC 16A V2.0 BLHeli_32
Brand: BetaFPV
SKU: 14553
Price: 2792 UAH
Availability: OutOfStock
Rating: 5 (29 reviews)

Price:2 792 uahPrice in USD:66.95

Brand: BetaFPVSKU 14553

Out of stock

Notify when available

Description

Improved version of BetaFPV F4 ESC V2.0 flight stack for Beta85X series mini quadcopters, consisting of F405 flight controller and 16A BLHeli_32 speed controller, which fully support 1105 5000KV motorless motors, 4S LiPo power supply and stable operation.

BLHeli_32 is the 3rd generation firmware after BLHeli and BLHeli_S, written for ESCs using a 32-bit processor. When using BLHeli_32 with the Dshot1200 protocol, a high level of processing power is provided and as a result lower input latency and higher update rate.

BetaFPV F405 V2 flight controller version adds 4 additional plug-in ports for ESC, VTX, RX and LED board, convenient installation.

The ESC 16A V2 version of the ESC 16A speed controller uses single N-channel MOSFETs on the board, which has lower internal resistance.

A 25V / 220uF capacitor is soldered on the XT30 power connector pin to reduce noise caused by voltage spikes.

Characteristics

F405 V2

Processor: STM32F405 (overclocked to 240MHz)
Gyroscope: MPU6000
Firmware Version: Betaflight OMNIBUSF4SD (OBSD)
OSD: built-in BetaFlight OSD (STM32 controls the OSD chip via SPI in DMA mode)
RX3 and TX3 with auto inverter, supports all receivers including TBS Micro RX
TX01 and RX01 ports are available for Frsky F-port, DSM2 / DSMX
Boozer solder pads
Support for programmable LEDs such as WS2812
Mounting Diagram: 26mm x 26mm
Weight: 4.2g

ESC 16A V2

Processor: STM32F051K66
Firmware: BLHeli_32
Support Protocols: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input Voltage: 3-4S LiPo
DC current: 16A
Peak current: 19A
Current sensor: Yes
Firmware target: BETAFPV-16A-32bit
Motor connectors: micro PH1.25mm
Weight: 4.4g (7.7g with XT30 cable)